Sanyo HT28745 Projection Television User Manual


 
16
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
CHANNEL SETUP OPTIONS (Continued)
When a digital channel is deleted, all of that channel’s sub-channels
are deleted as well.
Only previously deleted digital channels can be added back to the
database.
If one digital sub-channel is added back to the database all of that
channel’s sub-channels will be added back.
If the last remaining digital channel is deleted, the entire previous
Digital Channel Scan Memory database will be restored automatically.
If the last remaining analog channel is deleted (cable channel or off-
air channel) ALL analog channels (cable or off-air) will be restored
automatically, regardless of the previous Analog Channel Scan
Memory database.
INITIAL CHANNEL
The television can be programmed to tune to your
favorite channel each time it is powered on.
1
Press MENU key to display the Main menu.
2
Use the CURSOR ▲▼ keys to highlight the
Channel
category. Press ENTER.
3
Use the CURSOR ▲▼ keys to highlight the
Initial
Channel
option. Press ENTER.
4
Use the CURSOR key to select On. Press
ENTER
.
5
Press the TUNER key to choose Digital or Analog.
6
Select your favorite channel using the CHANNEL
▲▼ keys on the remote.
7
Press the ENTER key to set the initial channel.
8
Press the EXIT key to return to normal DTV viewing.
1
Press MENU key to display the Main menu.
2
Use the CURSOR ▲▼ keys to highlight the
Channel
category. Press ENTER.
3
Use the CURSOR ▲▼ keys to highlight
Channel
Scan Memory
option. Press ENTER.
“Add?” will appear below the channel number if the
selected channel is not in the database. “Delete?” will
appear below the channel number if the selected channel
is already in the database.
4
Use the CHANNEL ▲▼ keys or numerical keys to
select desired channel. HINT: Press the TUNER key
to switch between Digital and Analog Channel Scan
databases.
5
Press the ENTER key to delete or add the channel.
6
When you have finished adding and/or deleting chan-
nels, press the EXIT key to return to normal DTV
viewing.
CHANNEL SCAN MEMORY
Channel Scan Memory is a database of active channels
that you can scan through using the Channel Scan
(up/down) keys. This list can be customized by deleting
and/or adding channels.
NOTE: If the TV is powered off while any video mode is
selected, that video mode will be tuned when the TV
is powered on again (Video 1, Video 2, Component 2,
or Component 3).