Filter
Top Products
Before Operation - VCR part
12
Video channel Set
Video channel (RF output channel) is the channel on
which your TV receives picture and sound signals from
the DVD+VCR through the RF aerial cable.
If you have used a
SCART lead you will not have to tune
your TV, simply select the AV channel. The AV channel
is already pre-tuned for optimum video playback on
your TV.
Perform the following steps only if interference appears
in the TV picture after you have moved to a different
area or a new station has started broadcasting in your
area, or if you change the connection from RF connec-
tion to AV connection, or vise versa.
11
Turn on DVD+VCR and TV.
22
Set the vacant position 22 on your TV.
33
Press on the remote control to enter the
standby mode (the clock indicator will be
dimmed).
44
Press and hold CHANNEL + or - on the
DVD+VCR for more than 4 secs.
RF 22 will appear in the DVD+VCR display.
The following picture will be displayed on the TV
screen.
If the picture is snowy, move to step 5.
If the picture is clean, press on the DVD+VCR
to store the RF channel. The video channel is now
set.
55
Press CHANNEL + or - on the DVD+VCR to set
the video channel to a vacant position between
22 and 68 which is not occupied by any local
station in your area.
Note
The RF channel will not change until step 6 has been
executed.
66
Press to store the new RF channel into the
DVD+VCR.
77
Press to bring the DVD+VCR from standby
to on and follow your TV manufacturers tuning
instruction manual to tune a new channel to the
DVD+VCR.
U
sing your DVD+VCR for the very first time
For the following steps we assume that you have just
connected your DVD+VCR for the very first time.
To make tuning TV stations an easy task your
DVD+VCR incorporates the Automatic Channel
Memory System (ACMS). This system will automatical-
ly tune and store TV channels in VIDEO Plus+ System
order to your DVD+VCR.
While this is happening the clock (date & time) in the
DVD+VCR will be set automatically.
11
Make sure that you have correctly installed your
DVD+VCR.
22
Press to turn on your DVD+VCR.
If the initial Menu Screen doesn’t appear on screen,
make sure that you have tuned your TV to a video
channel. Or if this is correct it may mean that your
DVD+VCR is already tuned.
33
Press OK to start the automatic tuning process.
44
After storing all available TV stations your
DVD+VCR will sort them into VIDEO Plus+
System order.
TV Station Programme number
BBC1 PR01
BBC2 PR02
ITV PR03
CH4 (S4C) PR04
CH5 PR05
Satellite PR06
55
Press i to remove the menus from the TV
screen.
i
RF CHANNEL 22
SET
P
R
01 C23 00 BBC1
02 C26 00 BBC2
03 C30 00 ITV
ES
i
Pr-12
ACMS
ACMS
D
OK
i
Pr-12
ACMS