Filter
Top Products
19
HDMI AUDIO OPERATION
HDMI Audio- It includes three categories:
AUTO- It means the system will automatically detects
the available Digital and Analog input sources and take
the most suitable Audio output by the category of the
assigned input currently.
The Analog input (CVBS) is the default accepted setting
unless the Digital input (HDMI) has been detected. The
Analog output (CVBS) and Digital input (HDMI) don't
exist simultaneously.
Digital- During this setting, the Analog audio output
won't be occured. Only Digital Audio audio input can be
outputted.
Analog- During this setting, the Digital audio output
won't be occurred. Only Analog Audio audio input can
be outputted.
1無
Press the MENU key on the remote control to
display the Main menu.
2無
Use CURSOR ◄►keystohighlighttheAUDIO
mode. Press OK.
3無
Use CURSOR ▲(UP) and ▼(Down) keys to
highlight the HDMI Audio option. Press OK.
4無
Use CURSOR ▲(UP) and ▼(Down) keys to
select the Auto, Digital, or Analog option. Press
OK. (The red hook will appear in the white blank
space).
RESET AUDIO OPERATION
Reset Audio- It can make the previous adjusting settings
during the AUDIO mode recovered from the factory default
value.
1無
Use CURSOR ◄►keystohighlighttheAUDIO
mode. Press OK.
2無
Use CURSOR ▲(UP) and ▼(Down) keys to
highlight the Reset Audio option. Press OK.
3無
Use CURSOR ▲(UP) and ▼(Down) keys to
select Reset or Cancel option. Press OK.
NOTE : Press MENU key to return back to AUDIO menu
ADVANCED
ADJUST THE ADVANCED LEVELS
NOISE REDUCTION OPERATION
1無
Press the MENU key on the remote control to
display the Main menu.
2無
Use CURSOR ◄►keystohighlightthe
ADVANCED mode. Press OK.
3無
Use CURSOR ▲(UP) and ▼(Down) keys to
select the Noise Reduction option. Press OK.
4無
Use CURSOR ▲(UP) and ▼(Down) keys to
select Off, Weak, Medium, or Strong option.
Press OK.
MPEG NR OPERATION
1無
Press the MENU key on the remote control to
display the Main menu.
2無
Use CURSOR ◄► keys to highlight the
ADVANCED mode. Press OK.
3無
Use CURSOR ▲(UP) and ▼(Down) keys to
select the MPEG NR option. Press OK.
4無
Use CURSOR ▲(UP) and ▼(Down) keys to
select Off or On option. Press OK.
DYNAMIC AI OPERATION
1無
Press the MENU key on the remote control to
display the Main menu.
2無
Use CURSOR ◄► keys to highlight the
ADVANCED mode. Press OK.
3無
Use CURSOR ▲(UP) and ▼(Down) keys to
select the Dynamic AI option. Press OK.
4無
Use CURSOR ▲(UP) and ▼(Down) keys to
select Off, Weak, Medium, or Strong option.
Press OK.