Filter
Top Products
49
This function is used to reset the lamp replacement
counter. When replacing the projection lamp, reset the lamp
replacement counter by using this function. See page 57 for
operation.
Lamp counter
Factory default
This function returns all setting values except for the user
logo, PIN code lock, Logo PIN code lock and the lamp
counter to the factory default settings.
Select Factory default and
this box appears. Select
“Yes,” and the next box
appears.
Factory default
Select “Yes” to
activate it.
This function provides the following options in the cooling
fans’ operation after turning off the projector (p.20).
L1........... Normal operation
L2........... Slower and lower-sound than the normal
operation (L1), but it takes longer to cool down
the projector.
Fan
Setting
Exit the Setting Menu.
Quit