Filter
Top Products
CONNECTIONS
Connect the video camera and monitor TV as shown in the figure below.
NOTE: Before making the connections, make sure all the devices are disconnected from the power outlet.
ALARM IN/
CLOCK IN
COM
ALARM OUT/
CLOCK OUT
SERIES OUT/
NON REC OUT
SERIES
IN
OUT IN
EJECT
SW
OUT
TAPE
END OUT
COM
WARNING
OUT
COM
AUDIO VIDEO
OUT
OUT
IN
IN
MIC IN
REMOTE
PUSH
OPEN
AC IN ~
Video camera
(sold separately)
Monitor TV (sold separately)
Coaxial cable
(sold separately)
To
VIDEO IN
jack
To
VIDEO OUT
jack
From an external
audio source
Power cord
To outlet
To remote
control
(sold separately)
Power Cord Installation
1 Plug the supplied power cord firmly into the AC power
input AC IN~ socket.
2 Insert the plug of this power cord into a outlet.
NOTES:
•
For more details, please refer to the manuals
accompanying all other devices. If the connections are
not made properly, it may cause a fire or damage the
equipment.
•
You can use a VA-RMN01 Remote Control Unit (sold
separately) to control remotely the VCR.
•
The grounded power cord (3 pin plug) must be
connected to a grounded power outlet.
•
If there is no video signal when the power is turned on,
“NO VIDEO” will be displayed on-screen.
NU4QR/NA (SRT-2400 GB) Thu. Sept., 21/2000
8
English