Filter
Top Products
SERIES RECORDING
Continous Loop Recording Setup
A minimum of 2 units are required for continuous loop
recording.
Example with 2 VCRs.
Under loop recording when the recording finishes on the
first unit, the new recording will start on the second unit.
When the recording finishes on the second unit, recording
will start on the first unit.
1 The SERIES OUT/CLOCK OUT terminal of VCR
No.2 and the SERIES IN terminal No.1 should be
connected (See diagram).
2
Set the following items as indicated.
Item VCR No.1 VCR No.2
Cassette tape Loaded Loaded
Operation mode Stop Stop
“TAPE END MODE” (in
(SET UP 3) menu)
REW REW
“SERIES REC IN” (in
(SET UP 3) menu)
Y (YES) Y (YES)
“OUTPUT” (in (SET UP
5) menu)
SERIES SERIES
Security lock Canceled Set
3
Press the REC button on VCR No.1.
°
Recording will start in series recording mode.
4
Set the security lock on VCR No.1.
NOTES:
•
To avoid recording problems, the “TAPE END MODE”
in (SET UP 3) menu should be set to “REW” for both
units.
•
In loop recording mode, the tape will be re-recorded
over. If you need to keep the recorded infomation,
please eject the tape after recording is complete and
insert a new tape.
Loop recording connection (example with 2 VCRs)
ALARM IN/
CLOCK IN
COM
ALARM OUT/
CLOCK OUT
SERIES OUT/
NON REC OUT
SERIES
IN
OUT IN
EJECT
SW
OUT
TAPE
END OUT
COM
WARNING
OUT
COM
ALARM IN/
CLOCK IN
COM
ALARM OUT/
CLOCK OUT
SERIES OUT/
NON REC OUT
SERIES
IN
OUT IN
EJECT
SW
OUT
TAPE
END OUT
COM
WARNING
OUT
COM