Filter
Top Products
PROGRAM TIMER RECORDING
Using Timer Recording for Several
Programs
If two or more programmed recording times overlap on
the same day, the VCR will not begin recording a new
program until the previous program has ended (as shown
below).
Program Recording Order
TIMER SETTING NOTES:
œ If the programmed recording falls on a Saturday or a
Sunday, the Daily recording mode will not be possible.
œ To select the A/V recording mode, press the
INPUT
button instead of selecting a channel number.
œ Timer recording is not possible through the front
AUDIO/VIDEO input jacks.
œ 12:00 PM = noon; 12:00 AM = midnight.
œ If the end of the tape is reached during timer recording,
the VCR stops and the power turns off automatically.
œ
If the power fails or the VCR is unplugged from the
AC outlet, the correct clock time and timer settings
are kept in memory for approximately 5 seconds.
After 5 seconds, the clock and program timer must
be reset when power is restored. Refer to INITIAL
SETUP to set the VCR.
œ If a program timer is set and a tape is not loaded into
the VCR, the TIMER indicator will flash.
Program
7:00PM
These portions will
not be recorded
10:00PM8:00PM 9:00PM
SC4HW/NA (VHR-H530 GB) Fri. Jan., 07/2000
33