Filter
Top Products
SCEPTRE X32 HDTV User Manual
- 34 -
www.SCEPTRE.com
4. Connect the red color connector to both your set-top box and
Composite 1’s red connector port off the back of your X32 LCD
HDTV.
5. Turn on the X32 LCD HDTV and your set-top box.
6. Use the remote control’s source button or the source button on the
right side of the TV to switch to AV1 (CVBS).
Please Note :
• If Composite 1 is already occupied, please use Composite 2 as
your connection port and switch source to AV2 (CVBS).
• Make sure the yellow connector in the same group is not
connected. You can only connect either the S-Video port or the
Yellow Connector port. DO NOT CONNECT BOTH.
• Please reference the set-top box’s manual as well, to make sure
the set-top box is configured to output correctly to the TV.
• Sceptre’s X32 LCD HDTV supports SONY’s universal remote
code. Please look up SONY’s codes in your universal
remote’s hand book.