Filter
Top Products
SCEPTRE X32 HDTV User Manual
- 96 -
www.SCEPTRE.com
clean water and wipe again. Wipe the display with a dry micro-fiber
cloth or 100% cotton cloth afterwards.
Please Note :
• Make sure you wring the water out of the cloth before
cleaning the bezel or remote in order to prevent water
from penetrating into the electronics.
Cleaning the Screen
1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2. The LCD screen glass is extremely fragile. Do not scrape it with any
material. Do not press or tap the screen to avoid cracking. When
the screen is dirty to the point where you cannot simply dry wipe it,
please lightly dampen the wiping material with clean water and wipe
again. Wipe the display with a dry micro-fiber cloth or 100% cotton
cloth afterwards.
Trouble Shooting
The following table contains the common problems and the solutions to these
problems. Please check this list before you contact the technicians.
Problems Solutions
Connect power cord correctly.
Turn on power.
Connect video cable correctly.
NO
PICTURE
Select the input signal source with proper cable connection with
the source button.
ABNORMAL
COLORS
Match the colors on the cables to the ports off the back of the
television. I.E. red cable to red colored port.
PICTURE IS
TOO DARK
Adjust your contrast, brightness and lamp settings from the OSD
Menu.
Make sure you have connected both your video and audio cables. AUDIO
ONLY NO
PICTURE
The TV’s tuner signal must not be lower than 65 dB.