Filter
Top Products
3
Connect the coaxial cable that delivers the signal from your cable service
provider
1 Cable In
2 Cable Out Connect a coaxial cable to Cable Out to send analog audio and video signals
to a TV or VCR. These signals are SDTV video and stereo audio
3 Audio Out
(LEFT and
RIGHT)
Connect RCA cables to Audio Out to send analog audio signals (left and right)
to a stereo receiver or TV with stereo outputs
4 Video Out Connect to video input of TV or VCR
5 Digital Audio
Output
Connect an RCA cable to send a digital audio signal to a surround-sound
receiver or other digital audio device
Connect either to a VCR for archiving saved content from the 8300 or connect
to another set of inputs (composite) on your TV
6 Secondary Video
and Audio Out
7 S-Video Out Connect an S-Video cable to send an S-Video signal to your TV or VCR. This
signal is standard definition but higher quality than other SDTV connections
9SATA Connect to an external Serial ATA (SATA) hard disk drive for expanded
recording capability. Please check with your cable service provider for a list of
approved hard drive models for use with the 8300
10 AC Outlet Connect the AC power cord from another device, such as a TV
What’s On the Back Panel?
8IR (This connector reserved for future use)
IR
CABLE
OUT
THIS DEVICE IS INTENDED TO BE ATTACHED
TO A RECEIVER THAT IS NOT USED TO
RECEIVE OVER-THE-AIR BROADCAST
SIGNALS. CONNECTION OF THIS DEVICE
IN ANY OTHER FASHION MAY CAUSE
HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS AND IS IN VIOLATION
OF THE FCC RULES, PART 15.
120 VAC
60HZ 5A
LISTED 14H1
CABLE EQUIP.
120 VAC
60HZ 80W
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CABLE
IN
SATA
S - VIDEO
OUT
CATV CONVERTER
MADE IN MEXICO
VIDEOVIDEO
TV
OUT 1 OUT 2
A
U
D
I
O
DIGITAL
AUDIO OUT
L
R
AVIS:
RISQUE DE CHOC
ELECTRIQUE NE PAS OUVRIR
1 75 64 98 10 1132
T11274
11 AC Power Input Connect the power cord to deliver power to the 8300