Scientific Atlanta 3250HD Flat Panel Television User Manual


 
10
How Do I Choose
the Screen Type?
1. Turn on the TV.
2. Turn off the 3250HD.
3. Press the INFO and GUIDE buttons on the front of the 3250HD
simultaneously.
4. Press
on the remote control to start the HDTV Setup Wizard.
5. Follow the easy instructions on the TV screen.
6. Press the CBL and POWER keys on the remote control, and then the
3250HD will turn on.
After you connect your entertainment devices, follow these instructions
before you begin watching TV.
1. Connect the 3250HD to your HDTV, VCR, and other entertainment
devices as shown in the diagrams on the following pages. (The
diagrams in this guide do not cover every possible combination.)
2. Connect the 3250HD to the coaxial cable coming from the wall.
3. Plug the 3250HD and the TV into an AC power source.
4. Do not turn on the 3250HD or HDTV yet.
5. Wait until you see one of the following displays on the front of the
3250HD:
• Current time
• Four dashes (- - - -)
Important: It may take several minutes for the 3250HD to receive the
latest software, programming, and service information. When the front
panel displays the time or four dashes, the update is complete.
6. After the update is complete, turn on the TV. Do not turn the 3250HD on
yet. Go to How Do I Choose the Screen Type, next in these instructions.
How Do I Connect
the 3250HD to My
TV and Other
Entertainment
Devices?
When you are ready to connect the 3250HD and to choose the screen type
for your TV, follow these instructions.
Connecting Entertainment Devices