Filter
Top Products
Page 4 Of 12 Pages Scion Technology Document 6-004-01-GB
SET UP BY USING THE LIBRARY SEARCH FACILITY
If the correct code for the TV to be used cannot be identified from the list, a code search
facility can be used.
The following handset keys are relevant to this procedure:
Program + key
Indicator key
Standby key
Program - key
P
+
P
-
1) Switch on the TV to be controlled.
2) While pressing and holding down the STANDBY key, hold down the MUTE key. Keep
both keys pressed down for approximately two seconds until the INDICATOR key
flashes once.
3) Point the handset towards the TV and press either the P+ or P- key repeatedly until
the TV switches off. The P+ key searches forwards through the library and the P- key
searches backwards through the library. Alternatively, hold down the P+ or P- key and
the handset will scroll through all available codes at approximately one second per
code.
4) When the TV switches off, stop pressing the key. Should it accidentally be pressed
after the TV has switched off, back up by pressing the opposite key.
5) Press and release the STANDBY key. The INDICATOR key should blink 3 times,
indicating that the code has been stored in the handset’s non-volatile memory.
6) While pointing the handset to the TV, try all of the functions of the remote control.
7) If the TV does not respond correctly to the commands from the remote control
continue the search process by repeating steps 1 to 6 until a suitable code is found.
The handset will continue its search from the last code selected.
8) In case none of the codes provide the necessary functionality, please consult the
corresponding page of the Scion’s web site for the latest available TV set code
information.
This method is quite time-consuming as the library contains a large number of codes that
may have to be scrolled through.