Filter
Top Products
Scion Technology Document 6-004-01-GB Page 5 Of 12 Pages
READING OUT THE STORED CODE NUMBER
Having found a suitable code by the library search method, it is useful to identify the code
number so that it may be noted on the label inside the battery compartment lid for future
reference. It should also be noted on the corresponding section of this manual.
The following handset keys are relevant to this procedure:
Standby key
1
0
+
10+ key
Indicator key
Mute key
1) Press and hold down the STANDBY key on the handset and at the same time press
and hold down the MUTE key. Keep both keys pressed down for approximately two
seconds until the indicator lights and then release both keys.
2) Press and release the 10+ key.
3) The INDICATOR key will then blink the number of the first digit, pause, blink the
number of the second digit, pause and then blink the number of the third digit. The
table below indicates how to interpret the blinks.
4) The handset will then return automatically to normal status.
Number Of Blinks Digit
10 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
Room TV Set Code