Filter
Top Products
ENFORCER DR-1 Series DVR Quick Setup Guide
SECO-LARM U.S.A., Inc 11
Playback:
1. Playback is stopped and started by pressing the PLAY/STOP button on the front panel or
remote, or by right clicking the main screen and choosing .
2. Playback will start from wherever the previously displayed recording was stopped.
3. Use the MODE, PLAY/STOP, FREEZE and ZOOM buttons to adjust playback. Using the
mouse, right click and select , , or respectively.
4. When playback is paused, pressing the right/left buttons will advance/reverse by one frame.
Using the mouse, scrolling up or down will advance/reverse respectively.
5. Change the playback speed using the right/left arrow buttons or scroll up and down with a
mouse. Playback can be sped up or slowed down by up to 32x its original speed. Current
playback speed is displayed in the lower left-hand corner of the screen.
6. To return to live view, press PLAY/STOP.
Note: The system menu cannot be accessed while in Play or Freeze mode. First return to live
view to access the system menu.
Exporting Video:
The DR-1 series offers a fast, simple and convenient export function.
1. Connect a USB flash drive or other storage device via the USB port on the front of the DVR.
2. Play back the desired recorded data. Mark the export start point by pressing the COPY button
on the front panel or remote, or right click the main screen and choosing .
3. Continue playback until you reach the desired end point. If needed, increase playback speed
as explained in Playback on page 11 of this guide. Mark the export end point by pressing the
COPY button on the front panel or remote, or right click the main screen and choosing .
4. The DVR will prompt the user to confirm the data for export. Export may take up to an hour.
5. Data exported is in .drv format and can be viewed using the built-in remote viewing software.
Please refer to the User’s Manual.
Note: A copy of the video player software will be added to the export device.
Shutting Down the DVR:
1. Enter the system menu by pressing MENU on the front panel/remote or right clicking the main
screen and choosing .
2. Enter the Shutdown menu and choose Power Off, or use a mouse to click Execute.
C
C