Sharp 20F540 L DVD VCR Combo User Manual


 
8
Dimension: 140mm x 215mm
Quick Reference Control Operation
Part Names
Quick Reference Control Operation (Continued)
20F540 8
Note:
The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
The degree of illumination will vary depending on the strength of lighting used.
The degree of illumination will decrease with time and depending on the temperature.
The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
Sunlight and fluorescent lighting are the most effective when charging the display.
The TV set and remote control illustrations and the on-screen displays in this manual may differ from their actual
appearance.
1
2
3
4
5
6
7
8
9
0
100
POWER
TV
MENU
MUTE
PAUSE
FLASHBACK
DISPLAY
INPUT
TV CATV VCR DVD
STOP
REC
REW
PLAY
FF
CH/SKIP
VOL
CH
CH
VOL
+
ENTER
A
B
C
D
PERSONAL PREFERENCE
DVD
VCR
CATV TV
DVD VCR
Basic Remote Control Functions
POWER
Press On.
Press again Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons. (See page 33.)
VOLUME UP/DOWN
(k) Increases sound.
(l) Decreases sound.
Changes or selects the TV
adjustments on On-Screen Display.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
DVD/VCR CONTROL
See page 40.
CATV/DVD-TV/VCR MODE
SELECT SWITCH
In TV/VCR position, signals sent will be
for TV and VCR control.
In CATV/DVD position, signals sent will
be for cable TV converter and DVD
control.
Infrared Transmitter Window
DISPLAY
Press Displays receiving channel for
4 seconds.
Press again Removes display.
Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press Switches to external video
INPUT 1 mode.
Press twice Switches to external
video INPUT 2 mode.
Press 3 times Switches to external
video INPUT 3 mode or COMPONENT
mode.
Press 4 times Switches back to the
original TV mode. See page 38.
ENTER
Used in some instances where a Cable
Converter Box requires an “enter”
command after selecting channels,
when using the REMOTE KEYPAD
button. See page 40 .
CHANNEL UP/DOWN
(a) Selects next higher channel.
(s) Selects next lower channel.
See pages 30–32 for Channel
Setting.
• Moves the “ E ” mark on the MENU
screens.
MUTE
Press Mutes sound.
Press again Restores sound.
When sound is muted, CLOSED
CAPTION appears if available.