Filter
Top Products
6
LC-46SE94U/LC-52SE94U
•
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
■
2
Insert the projections on the speaker unit into the
corresponding slots on the TV, then fasten the screws.
3
Connect the ends of the cables to the speaker
terminals as shown below.
Connect the leads to the speaker terminals of the
same color.
• To detach the speaker unit, perform the steps in reverse
order.
1
Confi rm that there are 4 screws and a screwdriver
supplied with the speaker unit.
Insert and tighten the 4 screws with the screwdriver
(supplied with the product) in the order of
1
,
2
,
3
and
4
.
QUICK REFERENCE
1
2
4
3
Screwdriver
Screws
Soft cushion
2
3
1
1
2
2
1
Set the post for the stand unit onto the box.
2
Attach the base to the post.
3
Insert and tighten the 8 screws into the 8 holes
on the bottom of the base.
3
1
Insert the stand into the openings on the
bottom of the TV.
2
Insert and tighten the 4 screws into the 4 holes
on the rear of the TV.
• To detach the stand, perform the steps in reverse order.
1
Confi rm that there are 12 screws (all the same size)
supplied with the TV.
Hex key
Screws
Soft cushion
Attaching the Stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
•
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Hex key
Screws
Red
Red
Black
Black