Ferrite core
POWER
POWER indicator
7
Ventilation & Cleaning Tips
Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat source or use it near
water. The AQUOS television is designed for AC use only and should be used with the supplied AC cord.
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe and
avoid pressing on the screen. To clean the outer cabinet, use the same method. Do not use
liquid or aerosol cleaners.
The screen is glass and can be scratched or broken when dropped or impacted.
QUICK REFERENCE
STOP! To safely remove the AQUOS television from the box
• It's best to use 2 people to remove the AQUOS television for stability.
• Lift onto installation location as the diagram illustrates.
QUICK INSTALLATION TIPS
Attach your antenna to the back of the AQUOS
television. (See page 12.)
Place the Ferrite core in the space indicated in the
below fi gure and bundle the cords properly with
the cable clamp and the cable tie.
How to turn on the AQUOS television for the fi rst
time.
A) Press POWER on the AQUOS television.
Connect the AC plug for the AQUOS television into
the AC outlet.
B) The POWER indicator on the front of the
AQUOS television lights BLUE.
• TV angle cannot be adjusted.
LC-46SE94U
LC-52SE94U
LC-65SE94U
AC outlet
• Place the TV close to the AC outlet, and keep the power
plug within reach.
• This product must only be connected to a 120 V, 60 Hz,
grounded (3-prong) outlet.
Connecting it to any other kind of outlet will damage the
product and invalidate the warranty. (LC-65SE94U only)
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
1
2
3
4