Filter
Top Products
46
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5INPUT5
i.LINK
MENU
[
Option
...
Input Select
]
Option
Input Select
Output Select
Audio Only
Quick Shoot
[Fixed]
[ANALOG PC]
[Off]
MENU
[
Option
...
Input Select
]
DIGITAL PC
ANALOG PC
DIGITAL AV
ANALOG AV
Useful adjustment settings
Input Select
NOTE
• If you set INPUT1 and INPUT2 to Auto, the TV will
automatically select the input signal.
• Check the operation manual of the external equipment
for the signal type.
• Setting INPUT 1 and INPUT 2 signal selection to “Auto”
when other equipment is connected will result in the
following connection priority.
Selecting input source
Use this menu to select the input source.
INPUT 1 and INPUT 2
1. COMPONENT VIDEO
2. VIDEO
Press INPUT to select INPUT5.
DVI input signal setting
Press MENU and the MENU screen displays.
Press c/d to select “Option”.
Press a/b to select “Input Select”, and then
press ENTER.
Press INPUT.
• A list of selectable sources appears.
Press INPUT again to select the input source.
• An image from the selected source
automatically displays.
• You can also select the input source by
pressing a/b.
• If the corresponding input is not plugged in,
you cannot change the input. Be sure to
connect the equipment beforehand.
Selecting input signal type
For setting the signal type of external equipment
connected to INPUT 1 and INPUT 2 terminals.
Press a/b to select the signal type you want
to set, and then press ENTER.
• If the selected signal type is incorrect, an image
does not display or no color image displays.
Press MENU and the MENU screen displays.
Press a/b to select the equipment
connected to INPUT 5 terminal, and then
press ENTER.
Press c/d to select “Option”.
Press a/b to select “Input Select”, and then
press ENTER.
1
2
1
2
3
4
1
2
3
4
5
Press MENU to exit.
5
Press MENU to exit.
6
LC-57D90U(E)-044-050 06.1.12, 2:52 PM46
Black