Sharp BD-AMS10U Blu-ray Player User Manual


 
68
On-screen Error Messages
The following messages appear on the TV screen in case of an error during operation.
Error message Possible Error Suggested Solution
Cannot play. • The disc cannot be played back with this Player. • Check the disc, and load it correctly.
Incompatible disc. • If you load a disc which cannot be played with this
Player (i.e. a scratched disc), or if you load a disc upside
down, this message will appear, and the disc tray will
automatically pop out.
• Occurs if the loaded disc cannot be played because it is
a non-standard disc or scratched, etc.
• Remove the disc.
Cannot operate. • Occurs if an operation is incorrect.
This USB memory is not formatted properly. Please format
the memory in USB memory management.
• Occurs if there is a formatting error.
• Occurs if the USB memory is not formatted with FAT
32/16.
• Format the USB memory again.
• Format the USB memory with your PC.
The Connected USB Memory cannot be used. It should be
compliant with USB 2.0
• Occurs if USB memory not compliant with USB 2.0 High
Speed (480 Mbps) is used (i.e. USB 1.0/USB 1.1).
• Connect USB 2.0 High Speed (480 Mbps) compliant
USB memory.
NOTE
Cinavia Notice
• This product uses Cinavia technology to limit the use of unauthorized copies of some
commercially-produced film and videos and their soundtracks. When a prohibited use
of an unauthorized copy is detected, a message will be displayed and playback or
copying will be interrupted.
• More information about Cinavia technology is provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.com. To request additional information about
Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer
Information Center, P.O. Box 86851, San Diego, CA, 92138, USA.