Filter
Top Products
27
Before using the Recorder, use the
Connection Guide function for easy initial
settings regarding TV connection, on-screen
language, etc.
Preparation
•Turn on the power of TV.
•Switch TV input to the AV input used to
connect to the Recorder.
1
Press and hold CONNECTION
GUIDE for more than 2 seconds.
Selecting the On-screen
Display Language
2
Press ' / " to select the lan-
guage you want to use.
NOTE
•You can change On-Screen Display
Language afterward using the Connection
Guide function.
3
Press SET/ENTER.
•The “START TV SET UP” screen with
“OK” button is displayed.
4
Press SET/ENTER.
•The “SELECT TV TERMINAL” Select
screen is displayed.
Selecting the TV Terminal
5
Press ' / " to select the type of
video input terminal on the
connected TV.
6
Press SET/ENTER.
•The “SELECT TV MODE” screen is
displayed.
Selecting the TV Screen
Aspect Ratio
7
Press ' / " to select the screen
aspect ratio of the connected TV.
8
Press SET/ENTER.
•The “ADVANCED SETTINGS”
Confirmation screen is displayed.
9
Press \/| to select “YES” or
“NO”, then press SET/ENTER.
• When “YES” is selected
The “ADVANCED SETTINGS” screen
is displayed. Proceed to step
10
.
• When “NO” is selected
The “INITIAL SETTING COMPLETE”
screen with “OK” button is displayed.
Proceed to step
17
.
Connection Guide
OSD LANGUAGE
SELECT OSD LANGUAGE
ENGLISH
FRANÇAIS
ESPAÑOL
82:0AMSAT 152/21
CONNECTION GUIDE
OK
82:0AMSAT 152/21
START TV SET UP.
SETUP CAN BE CHANGED AFTERWARD.
CONNECTION GUIDE
COMPONENT (Y, PB, PR)
S-VIDEO
VIDEO
SELECT TV TERMINAL
82:0AMSAT 152/21
CONNECTION GUIDE
SELECT TV MODE
WIDE 16:9
NORMAL 4:3
82:0AMSAT 152/21
ADVANCED SETTINGS
YES NO
CONNECTION GUIDE
82:0AMSAT 152/21
Continued on Next Page
|||
NOTE
•Press RETURN to go back to the preced-
ing screen during the setting procedure.