Sharp DV-HR300U DVD Recorder User Manual


 
69
DVD/CD Playback
This section explains playback of DVD-R/RW
discs recorded with this Recorder, commer-
cially available DVD Video discs (like movies)
and CDs.
To playback a DVD-R/RW recorded with
this Recorder, select the title to be played
back, and then start playback.
Display the list of initial images (thumb-
nails) for each title, and select a title. (REC
LIST)
Loading Disc
1
Press POWER to turn the power
on.
2
Press OPEN/CLOSE to open the
disc tray.
3
Load a disc on the disc tray.
Insert the disc with the label face up.
In case of disc recorded on both
sides, face the side you want to view
down.
4
Press OPEN/CLOSE to close the
disc tray.
DVD-R/RW Playback
VR MODE
DVD-RW
VIDEO MODE
DVD-RW
DVD-R
1
Press DVD to select DVD mode.
The DVD button on the front of the
Recorder lights up.
HDD mode is selected automatically
when the power is turned on.
2
Load the disc you want to play
back.
3
Press REC LIST to display the
REC LIST (thumbnail) screen.
See page 65 for details on how to use
the REC LIST.
If the loaded disc has a play list and
you press ORIGINAL/PLAY LIST, the
screen will switch to the play list
(page 80).
4
Press '/"/ \/ | to select the
title (or chapter) you wish to view.
5
Press SET/ENTER.
Playback will begin from the selected
title (chapter).
PLAY indicator (for DVD) on the front
of Recorder is lit green during
playback.
6
To stop playback, press STOP/
LIVE.
To Record a Chapter Mark
during Playback
Press CHAPTER MARK (under the
cover).
The message “RECORDED CHAPTER
MARK.” is displayed, and the chapter mark
is recorded.
Chapter marks can be set during playback
only with DVD-RW (VR mode).
Chapter marks cannot be set manually for
DVD-RW (Video mode), DVD-R or during
Simultaneous Recording/Playback.
NOTE
If a title was set with another DVD recorder,
and it contains characters which cannot be
displayed with this Recorder, then “
****
....
is displayed (up to 64 characters max.).
If you play back a play list on a disc
recorded with another DVD recorder and 1
title is 12 hours or more in length, only 12
hours of that title will be played back.
Playback by Selecting Title
To play back a disc recorded and finalized
in Video mode, press DVD TITLE, display
the “TITLE MENU” screen, and select a title
to play back.
VIDEO MODE
DVD-RW
DVD-R
1
Press DVD to select DVD mode.
The DVD button on the front of the
Recorder lights up.
HDD mode is selected automatically
when the power is turned on.
2
Load a disc recorded in Video
mode.
3
Press DVD TITLE.
The “TITLE MENU” screen is
displayed.
SWITCHED TO DVD/CD MODE.
1 2
654
3
82:0AMSAT 152/21
REC LIST(DVD ORIGINAL)
TITLE: CH33 FINE
TITLE INFO: 10/11 MON 4:00 PM – 4:10 PM
Continued on Next Page
|||
OPEN/CLOSE
DVD