Filter
Top Products
12
Channel Setting (AUTO)
Press MENU to display the Menu screen.
Press \/| to select “SETUP”.
Press '/" to select “CH SETUP”, and press OK.
Press '/" to select “AUTO”, and press OK.
AUTO
MANUAL
Press OK to begin the automatic programme search.
START SEARCH
• When the automatic programme search is completed, the
channel first received will be displayed.
After “SEARCH IS COMPLETED” is displayed, press
MENU to exit.
4
3
Channel Setting (MANUAL)
Perform steps 1 and 2 in Channel Setting (AUTO) to
display the Setup Menu screen.
Press '/" to select “CH SETUP”, and press OK.
Press '/" to select “MANUAL”, and press OK.
Press '/" to select the desired adjustment item.
POSITION 1
FINE 871.1 MHZ
COLOUR SYSTEM AUTO
SOUND SYSTEM B/G
SKIP OFF
NICAM OFF
A2 OFF
0
Each time you press \/|, the setting for individual
items changes as shown in the table on the right.
Press MENU to exit.
1
2
4
5
NOTE
• Switching COLOUR SYSTEM:
Set the system to Auto for normal TV reception. The Auto mode
automatically detects the receiving signal system and changes the
reception system of the LCD TV set. When the picture or sound is
not stable, switching to an appropriate system may improve the
picture or sound quality.
Selected item
POSITION
FINE
COLOUR SYSTEM
SOUND SYSTEM
SKIP
NICAM
A2
6
Description
The channel position changes to the upper or lower
number.
The frequency changes to allow fine tuning.
The mode changes as follows:
The mode changes as follows:
The mode changes as follows:
ON OFF
Channel numbers with a “ (RED)” mark on the left are
set to skip.
To turn off Skip, press Channel Select to select the
desired channel, and then set the Skip mode on the CH
SETUP (MANUAL) menu to “OFF”.
The broadcast sound system changes as follows:
ON (NICAM sound) OFF (Monaural TV sound)
Stereo system changes as follows:
ON (A2 sound)
OFF (Monaural TV sound)
3
Basic Operation (Continued)
5
2
1
B/G I D/K M
AUTO
N358
PAL60 N443
PAL
SECAM
6
LC15_20SH1M_X_E_P10-15.p65 04.12.22, 2:39 PM12