Filter
Top Products
19
To let you enjoy NICAM broadcasting, this LCD TV set receives
NICAM stereo system, bilingual and monaural broadcasts.
Stereo
The LCD TV set is receiving a stereo broadcast.
•Each time you press MPX, the mode changes between
“NICAM STEREO” and “MONO”.
•When “MONO” is selected, the TV sound is output monaurally.
NICAM STEREO
MONO
Bilingual
The LCD TV set is receiving a bilingual broadcast.
• Each time you press MPX, the mode changes as follows:
NICAM M1
NICAM M1+M2
NICAM M2
MONO
Monaural
The LCD TV set is receiving a monaural broadcast.
• Each time you press MPX, the mode changes between
“NICAM MONO” and “MONO”.
NICAM MONO
MONO
NOTE
• If approximately 3 seconds pass without a button being pressed,
the mode setting is automatically terminated and the LCD TV set
returns to the normal mode.
• The setting can be selected individually for each channel number.
NICAM Broadcast Selection
If the sound quality is poor due to a weak signal or other
problems during NICAM broadcast reception, set the “OFF”
position of the NICAM to change the TV sound to monaural.
Press MENU to display the Menu screen.
Press \/| to select “SETUP”.
Press ' /" to select “CH SETUP”, and press OK.
Press ' /" to select “MANUAL”, and press OK.
Press ' /" to select “NICAM”, and press \/| to select
“OFF”.
POSITION 1
FINE 871.1 MHZ
COLOUR SYSTEM AUTO
SOUND SYSTEM B/G
SKIP OFF
NICAM OFF
A2 OFF
0
• When the NICAM sound is set to the “OFF” position, the
TV sound is output in monaural.
Press MENU to exit.
(When the “OFF” position is selected)
15 NICAM
NOTE
• When the NICAM sound is set to the “OFF” position, MPX cannot
be used to change the audio mode between stereo and bilingual
setting.
2
1
6
3
5
4
LC15_20SH1M_X_E_P18-20.p65 04.12.24, 3:59 PM19