Sharp LC-20B2UA Flat Panel Television User Manual


 
17
1 Press the button.
2 Press the
5
button.
BASIC OPERATION (Continued)
Changing the Channels
Changing channels by using Channel Select on the remote control
To select a 1- or 2-digit channel
number (e.g., Channel 5):
Complete the following procedure
within 4 seconds.
This LCD TV set allows you to select up to 125 channels (1 to 125). To select a channel, enter a 2-
or 3-digit number.
1 Press the button.
2 Press the button.
3 Press the
5
button.
To select a 3-digit channel number
(e.g., Channel 115):
Complete the following procedure
within 4 seconds.
When selecting a 1-digit channel number,
do not fail to press the button first.
Changing channels with CH ( )/( ) on the remote control
Air Press CH ( ) and the channels change in the order shown below:
2 3 . . . 68 69 2 3 . . .
Press CH (
) and the channels change in the order shown below:
3 2 69 68 . . . 3 2 . . .
Cable Press CH (
) and the channels change in the order shown below:
1 2 3 . . . 125 1 2 3 . . .
Press CH (
) and the channels change in the order shown below:
3 2 1 125 . . . 3 2 1 . . .
1
4
7
MTS
2
5
8
0
3
6
9
100
POWER
DISPLAY
SLEEP BRIGHT
MENU
MUTE TV/VIDEO
CHVOL
FLASHBACK
Note:
Channel
Select
0–
5
1 ––
11
115
The 3 -digit channel number can be
selected only when the receiving mode is
set to CABLE in CH-SETTING. (For details
on setting the receiving mode, see page
25.)
Note: