Sharp LC-20B2UA Flat Panel Television User Manual


 
26
SET UP (Continued)
Saving broadcast TV channels in the memory
1 Press MENU to display the MENU
screen, press ]/[ to move the
cursor to SET UP, and press </ >
to enter.
2 Press ]/[ to move the cursor to
CH-SETTING, and press </ > to
enter.
3 Press ]/[ to move the cursor to
CH SEARCH, and press </ > to
enter.
Adding weak or additional channels or erasing unwanted channels from TV memory
1 Press MENU to display the MENU
screen, press ]/[ to move the
cursor to SET UP, and press </ >
to enter.
2 Press ]/[ to move the cursor to
CH-SETTING, and press </ > to
enter.
3 Press ]/[ to move the cursor to
CH MEMORY, and press </ > to
enter.
4 Use ]/[ or Channel Select to
select each desired channel to add
or erase.
5 Press > to add the channel to the
TV’s memory or press < to erase
the channel from the TV’s memory.
6 Press MENU to exit.
>
to add channel 2
to the TV memory
<
to erase channel 2
to the TV memory
ADJUSTMENT (Continued)
1
4
7
MTS
2
5
8
0
3
6
9
100
POWER
DISPLAY
SLEEP BRIGHT
MENU
MUTE TV/VIDEO
CHVOL
FLASHBACK
MENU/
]/[/
</ >
CHSETTING
AIR/CABLE
CH SEARCH
CH
M
E
M
ORY
RETURN
4 Press >. The tuner will search
through all available channels in
your area and add them to the
TVs memory.
START: EXIT:
MENU
CH SEARCH
AIR 2
Note:
To interrupt CH SEARCH, press <. CH
SEARCH will stop at the current
channel and will not add any higher
channels.
5 Press MENU to exit.
Note:
If CH SEARCH is performed again, the previously memorized channels will be lost.
1
4
7
MTS
2
5
8
0
3
6
9
100
POWER
DISPLAY
SLEEP BRIGHT
MENU
MUTE TV/VIDEO
CHVOL
FLASHBACK
MENU/
]/[/
</ >
Channel
Select
CHSETTING
AIR/CABLE
CH SEARCH
CH
M
E
M
ORY
RETURN
TO ADD: EXIT:
MENU
CH MEMORY
AIR 2
TO ERASE: EXIT:
MENU
CH MEMORY
AIR 2