Filter
Top Products
22
Basic Adjustment Settings (Continued)
AUDIO Adjustments
You can adjust the sound quality to your preference with the
following settings.
Press MENU to display the Menu screen.
Press \/| to select “AUDIO”.
Press '/" to select a specific adjustment item.
AUDIO
SETUP
OPTION
TREBLE [ ]– +
BASS [ ]– +
BALANCE[ ]L R
PC SOUND SELECT
RESET
0
0
0
Press \/| to adjust the item to the desired position.
Press MENU to exit.
A
• The items on the AUDIO menu cannot be set when headphones
are not used and “INPUT4 SELECT” is set to “OUT VAO”.
• When resetting all adjustment items (except for “PC SOUND
SELECT”) to factory preset values, perform the following
procedure.
1 Press '/" to select “RESET” in the AUDIO screen, and press
ENTER.
2 Press '/" to select “YES”, and press ENTER.
3
1
2
Selected item
TREBLE
BASS
BALANCE
\\
\\
\ button
||
||
| button
For weaker treble For stronger treble
For weaker bass For stronger bass
Decrease audio from Decrease audio from
the right speaker the left speaker
4
5
FILM MODE
Automatically detects a film-based source (originally encoded
at 24 frames/second), analyses it, and then recreates each
still film frame for cinematic picture quality.
Repeat steps 1 to 3 of COLOR TEMPERATURE on
page 21.
Press '/" to select “FILM MODE”, and press ENTER.
ON
OFF
Press '/" to select “ON”, and press ENTER.
Press MENU to exit.
A
• Set “FILM MODE” to “ON” manually to detect a film-based source
(originally encoded at 24 frames/second) when the input source
has vertical frequency of 60 Hz (e.g. NTSC).
•
“FILM MODE” cannot be set when 480P, 576P, 720P or 1080
I
signal
is received from the COMPONENT terminals.
•
“FILM MODE” cannot be
adjusted when the PC mode is selected
as an input mode.
• Film mode does not work when the input source has vertical
frequency of 50 Hz (e.g. PAL, SECAM).
QUICK SHOOT
Provides sharp pictures suitable for fast moving images such
as a sports program.
Repeat steps 1 to 3 of COLOR TEMPERATURE on
page 21.
Press '/" to select “QUICK SHOOT”, and press ENTER.
ON
OFF
Press '/" to select “ON”, and press
ENTER
.
Press MENU to exit.
A
• “QUICK SHOOT” may cause image noise. If this occurs, set the
function to “OFF”.
• “QUICK SHOOT” cannot be adjusted when the PC mode is
selected as an input mode.
4
3
1
4
3
2
1
2
LC-20B8U_E_P19-24.p65 05.2.3, 2:05 PM22