Filter
Top Products
20
To let you enjoy NICAM broadcasting, this LCD TV set
receives NICAM stereo system, bilingual, and monaural
broadcasts.
Stereo
The LCD TV set is receiving a stereo broadcast.
• Each time you press MPX, the mode changes between
“NICAM STEREO” and “MONO”.
•When “MONO” is selected, the TV sound is output monaurally.
49
NICAM
STEREO
49
MONO
Bilingual
The LCD TV set is receiving a bilingual broadcast.
• Pressing MPX changes the audio mode in the order shown
below.
• M1=main sound, M2=sub sound, or MONO=monaural sound,
can be selected.
49
NICAM
M1
49
NICAM
M2
49
MONO
Monaural
The LCD TV set is receiving a monaural broadcast.
• Each time you press MPX, the mode changes between
“NICAM MONO” and “MONO”.
49
NICAM
MONO
49
MONO
NOTE
• The setting can be selected individually for each channel number.
(When stereo sound is received)
(When monaural sound is received)
(When main sound is received) (When sub sound is received)
(When monaural sound is received)
If the sound quality is poor due to a weak signal or other
problems during NICAM broadcast reception, set the “OFF”
position of the NICAM to change the TV sound to monaural.
Press MENU to display the Menu screen.
Press \/| to select “SETUP”.
Press '/" to select “CH SETUP”, and press OK.
Press '/" to select “MANUAL”, and press OK.
Press '/" to select “NICAM”, and press \/| to select
“OFF”.
POSITION CH 1
COLOUR SYSTEM AUTO
SOUND SYSTEM B/G
SKIP OFF
FINE 695.25MHZ
NICAM OFF
A2 ON
• When the NICAM sound is set to the “OFF” position, the TV
sound is output in monaural.
Press MENU to exit.
(When the “OFF” position is selected)
49
NICAM
NOTE
• When the NICAM sound is set to the “OFF” position, MPX cannot
be used to change the audio mode (stereo and bilingual settings).
5
6
1
2
3
4
NICAM Broadcast Selection
LC-20SH4X_E_P17-21.p65 05.9.12, 9:21 AM20