Filter
Top Products
8
● Press POWER. The POWER indicator instantly changes
from red to green and the LCD TV set is turned on.
NOTE
• The on-screen display disappears after a few seconds.
● To turn off the main power, press POWER again.
Standby
To turn off the LCD TV
Press POWER. The POWER indicator will turn red.
To turn the LCD TV back on
Press POWER again. The POWER indicator will turn green.
Turning On and Off the Main Power
1
PAL
B/G
On-screen display
Basic Operation
Switching the TV/VIDEO Modes (INPUT1/INPUT2/TV)
Turn on the power of the connected video equipment.
Press TV/VIDEO (
)/( ) to select the applicable
input source.
• The screen changes in order of INPUT1, INPUT2 and TV
mode each time TV/VIDEO ( )/( ) is pressed.
INPUT2
PAL
12
PAL
B/G
INPUT1
INPUT1 mode
INPUT2 mode
TV mode
576I
NOTE
•INPUT1: Select this mode when viewing the signals from the video
equipment connected to the INPUT1 (COMPONENT)
terminals.
•INPUT2: Select this mode when viewing the signals from the video
equipment connected to the INPUT2 terminals using the
VIDEO or S-VIDEO terminal for video input.
If both terminals are connected with cables, the S-VIDEO
input terminal is selected as the high priority.
1
2
POWER indicator
POWER
LC-20SH4X_E_P08-09.p65 05.9.20, 6:55 PM8