Filter
Top Products
20
EN
O
PTIONAL SETTING
Picture Adjustment
You can adjust brightness, contrast, color, tint and sharpness.
1
Press [MENU] to display the main menu.
MENU
2
Use [Cursor K /L] to select “PICTURE”, then press
[ENTER].
e.g.) digital TV mode
or
ENTER
- TV SETUP -
PICTURE
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]
COLOR TEMP. [COOL]
OPTION
DTVCC
SELECT: K , L SET : ENTER
3
Use [Cursor K /L] to select the picture quality type you
want to adjust.
or
[BRIGHTNESS]
[CONTRAST]
[COLOR]
[TINT]
[SHARPNESS]
[RESET]
4
Within 5 seconds, use [Cursor s / B] to adjust the
quality.
or
Cursor
Cursor
BRIGHTNESS
to decrease brightness to increase brightness
CONTRAST
to decrease contrast to increase contrast
COLOR
to decrease color to brighten color
TINT
to add purple to add green
SHARPNESS
to make soft to make clear
5
Press [MENU] to exit.
MENU
Note:
• For resetting all picture adjustment items to the factory
preset values, use [Cursor K /L] to select “RESET”, then
press [ENTER], use [Cursor s/ B] to select “[YES]”, then
press [ENTER].
• The picture adjustment setting display will automatically
disappear in 10 seconds.
5 Closed Caption
TV
You can view closed captioning (cc) for TV programs, movies and news.
Closed caption refer to text of dialogue or descriptions displayed on-screen
for the hearing impaired.
1
Press [MENU] to display the main menu.
MENU
2
Use [Cursor K /L] to select “CAPTION”, then press
[ENTER] repeatedly to change the setting.
e.g.) digital TV mode
or
ENTER
- TV SETUP -
PICTURE
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]
COLOR TEMP. [COOL]
OPTION
DTVCC
SELECT: K , L SET : ENTER
[OFF]
[CAPTION1]
[CAPTION2]
[TEXT1]
[TEXT2]
[Caption Mode]
CAPTION1 and TEXT1;
are the primary caption and text services.
The captioning or text is displayed in the same
language as the program’s dialogue
(up to 4 lines of script on the TV screen, where it does
not obstruct relevant parts of the picture).
CAPTION2 and TEXT2;
are rarely available and broadcasters use them
only in special conditions, such as when “CAPTION1”
or “TEXT1” is not available.
• There are 3 display modes according to programs:
Paint-on mode: Displays input characters on the TV
screen immediately.
Pop-on mode: Once characters are stored in
memory, they are displayed all at
once.
Roll-up mode: Displays the characters continuously
by scrolling (max. 4 lines).
5