Filter
Top Products
14
Preset (Continued)
CLOCK SETUP
The Timer functions that turn power on at the specified time
do not work unless the clock has been adjusted. Be sure to
adjust the clock first.
Perform steps 1 and 2 in Channel Setting (AUTO) to
display the Setup Menu screen.
Press '/" to select “CLOCK SETUP”, and press OK.
Press '/" to set the time, and press OK.
•
Holding down '/" changes the setting at a high speed.
: :
0
0
0
0 0
0
Press MENU to exit.
Channel Setting (AUTO)
Press MENU to display the Menu screen.
Press \/| to select “SETUP”.
Press '/" to select “CH SETUP”, and press OK.
Press '/" to select “AUTO”, and press OK.
Press '/" to select “SOUND SYSTEM”. Each time
you press \/|, the setting for individual items
changes as shown in the table on the right.
SOUND SYSTEM B/G
START SEARCH
Press '/" to the select “START SEARCH”, and press
OK to begin the automatic programme search.
When the automatic programme search is completed,
the channel first received will be displayed.
1
2
5
7
1
2
3
4
4
3
Channel Setting (MANUAL)
Perform steps 1 and 2 in Channel Setting (AUTO) to
display the Setup Menu screen.
Press '/" to select “CH SETUP”, and press OK.
Press '/" to select “MANUAL”, and press OK.
Press '/" to select the desired adjustment item.
POSITION CH 1
COLOUR SYSTEM AUTO
SOUND SYSTEM B/G
SKIP OFF
FINE 871.1 MHZ
NICAM OFF
A2 OFF
0
Each time you press \/|, the setting for individual
items changes as shown in the table on the right.
Press MENU to exit.
1
2
4
5
NOTE
• Switching Colour system:
Set the system to Auto for normal TV reception. The Auto mode
automatically detects the receiving signal system and changes the
reception system of the LCD TV set. When the picture or sound is
not stable, switching to an appropriate system may improve the
picture or sound quality.
• When using Fine tuning, the channel number changes from green
to yellow.
• To return the channel to its original frequency setting, follow the
manual channel preset procedure. (For details “Presetting the
Channels (MANUAL)”, see page 13.)
Selected item
POSITION
COLOUR SYSTEM
SOUND SYSTEM
SKIP
FINE
NICAM
A2
B/G I D/K M
AUTO
N358
PAL60 N443
PAL
SECAM
6
Description
The channel position changes to the upper or lower
number.
The mode changes in the following order:
The mode changes in the following order:
The mode changes in the following order:
ON OFF
Channel numbers with a “● (RED)” mark on the left are
set to Skip.
To turn off Skip, press Channel Select to select the
desired channel, and then set the Skip mode on the CH
setup menu to “OFF”.
The frequency changes to allow fine tuning.
The broadcast sound system changes in the following
order:
ON (NICAM sound) OFF (Monaural TV sound)
Stereo system changes in the following order:
ON (A2 sound)
OFF (Monaural TV sound)
6
3
LC-22GA3MX_E_P12-15.p65 2004.9.9, 5:48 PM14