Filter
Top Products
17
Basic Adjustment Settings (Continued)
COLOUR SYSTEM (AV1, AV2 or AV3 Mode)
Set the system to “AUTO” for normal reception. The “AUTO”
mode automatically detects the receiving signal system and
changes the reception system of the set. When the picture or
sound is not stable, switching to an appropriate system may
improve the picture or sound quality.
Press MENU to display the Menu screen.
• The Picture Menu screen can be displayed directly by
pressing Red.
Press \/| to select “PICTURE”.
Press '/" to select “COLOUR SYSTEM”, and press
OK.
Press '/"/\/| to select “AUTO”, “PAL”, “SECAM”,
“N358”, “N443” or “PAL60” and press OK.
AUTO PAL6
PAL
SECAM
N358
N443
0
Press MENU to exit.
NOTE
• “COLOUR SYSTEM” is available only in the AV mode.
Colour Temperature
Adjust the colour temperature to give a better white balance.
Press MENU to display the Menu screen.
• The Picture Menu screen can be displayed directly by
pressing Red.
Press \/| to select “PICTURE”.
Press '/" to select “ADVANCED”, and press OK.
Press '/" to select “COLOUR TEMP.”, and press OK.
0
0
0
COLOUR TEMP.
RED [ ] – +
GREEN [ ] – +
BLUE [ ] – +
I/P SETUP
DNR
FILM MODE
QUICK SHOOT
RESET
Press '/" to select the desired item, and press OK.
USER
HIGH
MIDDLE
LOW
Press MENU to exit.
* When you select “USER”, the following items are adjustable.
NOTE
• When resetting “RED”, “GREEN” and “BLUE” to factory preset
values, perform the following procedure.
1Press '/" to select “RESET” in the “ADVANCED” menu, and
press OK.
2Press '/" to select “YES”, and press OK.
4
Selected item
USER
HIGH
MIDDLE
LOW
Description
Can set your desired colour*
White with Bluish tone
White with Reddish tone
5
6
Selected item
RED
GREEN
BLUE
Press
\\
\\
\ Press
||
||
|
Weaker red Stronger red
Weaker green Stronger green
Weaker blue Stronger blue
3
1
2
5
4
3
1
2
LC-22GA3MX_E_P16-18.p65 2004.9.9, 5:49 PM17