Filter
Top Products
36
Useful adjustment settings
1
2
3
Press MENU and the MENU screen displays.
Press c/d to select “Option”.
Press a/b to select “Quick Shoot”, and then
press ENTER.
4
OffOn
Press c/d to select “On”, and then press
ENTER.
NOTE
• Quick Shoot may cause image noise. If this occurs, turn
the function “Off”.
Quick Shoot
Improves LCD response when viewing fast-moving
images. The effect is greater at low room temperatures
(at or below 15˚C/59˚F).
Input Select
Selecting input source
Can use for selecting the input source.
Press MENU and the MENU screen displays.
1
2
4
3
Press c/d to select “Option”.
Press a/b to select “Input Select”, and then
press ENTER.
Press a/b to select a signal type you want
to set, and then press ENTER.
NOTE
• If no (colour) image displays, try to change the other
signal type.
• Check the operation manual of the external equipment
for the signal type.
• When the signal type is set to “AUTO”, the input terminal
where cable is connected is automatically selected.
• When the signal type is set to “AUTO” and multiple video
signal cables are connected, the signal type is selected
in the following prioritised order:
Input 1/Input 2: COMPONENT s VIDEO
Input 3: S-VIDEO s VIDEO
Press TV/VIDEO on the remote control unit
or TV/VIDEO on the TV.
Press TV/VIDEO on the remote control unit
or TV/VIDEO on the TV to select the input
source.
• An image from the selected source
automatically displays.
• You can also select the input source by
pressing a/b.
Selecting input signal type
For setting the signal type of external equipment.
Selectable item
AUTO, COMPONENT, VIDEO
AUTO, COMPONENT, VIDEO
AUTO, S-VIDEO, VIDEO
Input source
INPUT 1
INPUT 2
INPUT 3
1
2
LC-AX3X(E)-g 05.11.18, 1:00 PM36