Filter
Top Products
17
Quick setup for NXTV users
PPV TV
PPV System
TV Mode
Room Mode
[PPV TV]
[NXTV]
Default Channel [2]
Default Volume [20]
Reset
CH Re-Map
For quick setup, use the remote control unit to perform
the following operations. Before the setup, press
MASTER on the Remote Replicator to turn on the TV
in the MASTER mode.
PPV System
Sets the Pay Per View system.
Press
a
/
b
to select “NXTV”, and then press
ENTER.
• The TV will automatically turn off. Press MASTER
on the Remote Replicator to turn on the TV again.
Press MENU and the MENU screen displays.
Press
c
/
d
to select “PPV TV”.
Press
a
/
b
to select “PPV System”, and then
press ENTER.
1
2
3
4
Default Channel
Sets the default channel.
Press
c
/
d
to select “Analog” or “Digital”, and
then press ENTER.
Repeat steps 1 and 2 in PPV System.
Press
a
/
b
to select “Default Channel”, and
then press ENTER.
Press
a
/
b
to select “Analog/Digital”, and
then press ENTER.
1
2
3
4
Press MENU to exit.
Press
a
/
b
to select “Analog” or “Digital”, and
then press ENTER.
Input the default channel number by using
0 – 9, and then press ENTER.
• The channel number is based on the physical
number, and it may be different from the displayed
channel number specifi ed by the hotel server.
5
6
7
NOTE
• Default Channel setting from the hotel server has priority
over the TV setting when the TV is connected to the PPV
terminal box (ONLINE).
• The TV returns to the default channel when the TV is turned
on and is not connected to the PPV terminal box (STAND
ALONE).