Filter
Top Products
21
Direct Button Operation
An image from the selected source •
automatically displays.
Each time • INPUT is pressed, the
input source toggles.
If you press •
a
/
b
to select the
input source, press Enter to
confirm your selection.
See page 17-18 for external equipment •
connection.
MUTE
Mutes the current sound output.
Press MUTE.
Mute can be canceled by using the •
method below.
- Mute will be canceled if you press
VOL
+/-
or MUTE.
SLEEP
Allows you to set a time when the TV
automatically switches to standby.
Press SLEEP.
The remaining time displays when •
the sleep timer has been set.
Each time you press • SLEEP, the
remaining time switches as shown
below.
Off, 10, 20, 30, 40, 50, 60, 90, 120
When set, the time automatically •
starts counting down.
If you want to adjust the sleep •
timer, you can press SLEEP twice
then change the time setting.
One minute before the time •
expires, the remaining time
displays every second.
Select • "Off" by pressing SLEEP to
cancel the sleep timer.
The TV will enter standby mode (power •
indicator lights red) when the remaining
time reaches zero.
Changing Channels
You can change channels by pressing
CH
+/-
or 0-9, or • (DOT).
Examples:
To select a 1 or 2-digit channel number
(e. g., Channel 5):
Press 5 ENT.
To select a 3-digit channel number
(e. g., Channel 115):
Press 1 1 5 ENT.
To select a 4-digit channel number
(e. g., Channel 22.1):
Press 2 2 • (DOT) 1
ENT.
When selecting a 1-digit channel •
number, it is not necessary to press 0
before the number.
Changing Volume
You can change the volume by pressing
VOL
k
/
l
on the TV or on the remote
control unit.
To increase the volume, press •
VOL
k
.
To decrease the volume, press •
VOL
l
.
INPUT
To view external source images, select the
input
source using INPUT on the remote
control unit or INPUT on the TV.
Press 1.
INPUT.
A list of selectable sources •
appears.
Press 2.
INPUT
again to select the input
source.