Filter
Top Products
43
Using external equipment
Displaying broadcasts via an HDTV tuner
To watch an HDTV tuner image, select “INPUT3” from
“INPUT SOURCE” menu using b on the remote
control unit or INPUT on the Display.
Then select “INPUT3” on “Input Select” in the menu to
set the correct input signal type. (See page 51.)
The setting is stored and can be selected in the “INPUT
SOURCE” menu.
NOTE
• Each time b is pressed, the input source toggles.
• If the HDTV tuner image does not come in clearly, you
may need to change the input signal type setting on the
“Input Select” menu.
(For INPUT3 signal)
TV MENU
Option
Input Select
AUTO
COMPONENT
S-Video
Video
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
AVC System (rear view)
HDTV tuner
Watching broadcasts via an HDTV tuner
Connecting an HDTV tuner
You can use the INPUT 3 terminal when connecting an HDTV tuner and other audiovisual equipment.
Component cable
(commercially available)
AV cable (commercially available)
S-video cable
(commercially available)
When using component
cable, select
“COMPONENT” for
“Input Select” in the
menu.