Filter
Top Products
To select a 4-digit channel number
(e. g., Channel 22.1):
Press 2
s
2
s
• (DOT)
s
1
s
ENT
22.
Air Air DIGITAL
22.1
22.1
Air
22
Air
2
Air
11
Cable
1
Cable
115
Cable ANALOG
5
Air
5
Air ANALOG
37
NOTE
• When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
• When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
To select a 3-digit channel number
(e. g., Channel 115):
Press 1
s
1
s
5
Watching TV
Simple button operations for
changing channels
You can change channels in several ways.
Method 1
Using CH
r
/
s
on the remote control unit or on the
TV.
Method 2
1
Press FLASHBACK to switch to the previously tuned
channel.
2
Press FLASHBACK again to switch back to the currently
tuned channel.
NOTE
• FLASHBACK will not work if no channel has been
changed after the TV is turned on.
Method 3
Using remote control buttons 0-9, • (DOT) to select
channels for VHF/UHF/CATV/DIGITAL.
To select a 1 or 2-digit channel number
(e. g., Channel 5):
Press 5
s
ENT
NOTE
• When you enter 0–9 only, channel selection will be made if
there is no operation within a few seconds.
• If you push “0” by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter 0–9 and • (DOT), channel selection will be
made if there is no operation within a few seconds.
NOTE
• If you change the channel in the MASTER mode by using
0–9 on the remote control unit of LCD TV when the
TV is connected to the PPV terminal box, the terminal
transmission is used so the displayed channel number
will not match the inputted channel or channel may be
changed automatically.