Filter
Top Products
V-Chip
Secret No.
Status
V-Chip (DTV Only)
New Secret No.
Secret No. Clear
New Secret No.
aaaa
Input Secret No.
aaaa
Reconfirm
aaaa
V-Chip
V-Chip (DTV Only)
Secret No.
Status
On Off
New Secret No.
Secret No. Clear
New Secret No.
****
Input Secret No.
aaaa
Reconfirm
aaaa
Secret number setting
for parental control
(AV input mode only)
Press
a
/
b
to select “Parental CTRL”, and
then press ENTER.
Press MENU to display the MENU screen,
and then press
c
/
d
to select “Setup”.
Press
a
/
b
to select “Secret No.”, and then
press ENTER.
Select “New Secret No.”, and then press
ENTER.
Input the new 4-digit secret number by using
0–9.
Press RETURN to start confi guring the V-Chip
settings. (See pages 65 and 67 for details.)
Press
a
/
b
to select “Status”, and then press
ENTER.
Repeat steps 1 and 2 in Setting a secret
number.
• The secret number setting menu displays.
Input the 4-digit secret number by using 0–9.
Setting parental control status
Used to enable or disable the parental control function.
Press
c
/
d
to select “On” or “Off”, and then
press ENTER.
• Select “On” to enable and “Off” to disable Parental
CTRL.
NOTE
• You can skip steps 1 and 2 above while in the Parental
CTRL screen.
• The “V-Chip (DTV Only)” will only be selectable when a new
rating system can be downloaded via digital broadcasting
in the U.S.
Useful adjustment settings
1
3
4
2
6
Input the same 4-digit number on the
“Reconfi rm” screen as in step 4 to confi rm.
5
1
2
4
3
Press MENU to exit.
7
Press MENU to exit.
5
Allows you to use a secret number to protect certain
settings from being accidentally changed.
IMPORTANT:
Three conditions must be met to enable the V-Chip (see
pages 62 to 67):
1
Secret No. is registered.
2
V-Chip/V-Chip (DTV Only) settings have been
made.
3
“Status” is set to “On”.
Setting a secret number
PPV TV mode:
Parental CTRL is only for LODGENET and
nSTREAMS users. For ONCOMMAND, NXTV,
SeaChange and some LODGENET and
nSTREAMS (depending on the system you
have) users, the hotel server controls the
setting.
For LODGENET and nSTREAMS users,
use SELECT on the remote control unit of
LODGENET and nSTREAMS instead of ENTER
in the following operations.
PPV TV
NORMAL TV
62