Sharp LC-46D43U Flat Panel Television User Manual


 
PC
31.5 kHz
31.5 kHz
37.9 kHz
37.5 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9 kHz
48.4 kHz
56.5 kHz
60.0 kHz
47.7 kHz
640 x 480
720 x 400
VGA
800 x 600SVGA
XGA 1024 x 768
WXGA 1360 x 768
70 Hz
60 Hz
72 Hz
75 Hz
56 Hz
60 Hz
72 Hz
75 Hz
60 Hz
70 Hz
75 Hz
60 Hz
O
O
O
O
O
O
O
O
O
O
O
HDMI cable
(commercially available)
14
Preparation
PC
HDMI equipment
PC compatibility chart
It is necessary to set the PC correctly to display XGA and WXGA signal. Refer to page 37 to set PC input signals.
DDC is a registered trademark of Video Electronics Standards Association.
Power Management is a registered trademark of Sun Microsystems, Inc.
VGA and XGA are registered trademarks of International Business Machines Co., Inc.
PC Horizontal Frequency VESA StandardResolution Vertical Frequency
Connecting a PC
When connecting to a PC with an analog RGB terminal. (INPUT 6)
RGB cable
(commercially available)
NOTE
When using an HDMI-DVI conversion cable, input the audio signal to AUDIO terminal of INPUT 5.
When receiving an incompatible signal, such as 1080p, the message below appears without the image on the screen.
For an incompatible video signal: “An incompatible video signal has been received. Check the output device settings.”
For an incompatible audio signal: “An incompatible audio signal has been received. Check the output device settings.”
HDMI cable
(commercially available)
Connecting HDMI equipment
You can use the INPUT 4 or INPUT 5 terminal when connecting HDMI equipment.
Ø 3.5 mm stereo minijack
cable (commercially available)
When connecting to a PC with an HDMI terminal. (INPUT 4 or 5)
PC
NOTE
The HDMI terminals only support digital signal.