Filter
Top Products
33
Removing the stand– 40/46LE530X
For wall mounting with the optional bracket (AN-52AG4
or AN-37AG2) remove the stand.
Before setting TV on the wall
• Remove the connected cables (DVD, VCR, etc) from the
terminals.
• Detach the four caps at the 4 locations on the rear of the TV.
1 Unfasten the screw at the location on the rear of
the stand cover and remove the stand cover.
2 1 Unfasten the screws at the 3 or 4 locations on
the stand.
2 Detach the stand from the TV.
40 inch models 46 inch models
NOTE
• To attach the stand, perform the above steps in reverse order.
• As the TV is very heavy, be careful when moving it.
Removing the stand– 60LE630X
For wall mounting with the optional bracket (AN-52AG4)
remove the stand.
Before setting TV on the wall
• Remove the connected cables (DVD, VCR, etc) from the
terminals.
• Detach the four caps at the 4 locations on the rear of the TV.
1 Unfasten the screws at the 4 locations on the rear
of the stand.
2 Detach the stand from the TV (hold the stand so it
will not drop from the edge of the base area).
NOTE
• To attach the stand, perform the above steps in reverse order.
• As the TV is very heavy, be careful when moving it.