Filter
Top Products
66
Enjoying 3D image viewing
Preparing for the 3D glasses
Supplied accessories
Make sure the following accessories are provided
with the 3D glasses.
3D glasses (x 2)
Nose pad*
(x 2)
Cleaning cloth (x 1)
* Nose pads are already attached.
NOTE
• The illustrations above are for explanation purposes and
may vary slightly from the actual accessories.
• Additional 3D glasses listed below are available.
Please purchase them at your nearest shop.
Part Names
no
p
n
Power button
o
LED indicator
p
Nose pad
NOTE
• The power turns off automatically in the following cases:
− When pairing fails
− When the 3D glasses are not operated in standby for
15 seconds
1 Power button
• When the power button is pressed for 2 or more
seconds with the power off, pairing with the TV
starts.
• When the power button is pressed for 2 or more
seconds with the power on, the power turns off.
• When paired, the power will turn off if the power
button is pressed for 2 or more seconds.
• When the power button is pressed for less than 2
seconds with the power off, the 3D glasses will turn
to standby.
• When the 3D glasses are in 3D mode with the
power on, pressing the power button for less than 2
seconds will turn the 3D glasses to 2D mode.
• When the 3D glasses are in 2D mode with the power
on, pressing the power button for less than two
seconds will turn the 3D glasses to 3D mode.
• When paired, the 3D glasses will be non-reactive if
the power button is pressed for less than 2 seconds.
2 LED light
• When paired with the TV, the LED light blinks in red
and green.
• When pairing is completed successfully, the LED
blinks in green for 3 seconds.
• When the power is turned on, the LED lights up in
green for 3 seconds.
• When in 3D mode, the LED blinks in green in
3-second intervals.
• When in 2D mode, the LED blinks in red in 3-second
intervals.
• When the power is turned off, the LED blinks in
green 3 times.
NOTE
• When in low voltage mode:
− When in 3D mode, the LED blinks in green in
3-second intervals.
− When in 2D mode, the LED blinks in red in
3-second intervals.
3 Nose pad mount
• The dedicated nose pad can be mounted here.
Part name Part number
3D glasses AN-3DG40