Filter
Top Products
45
MP3/WMA/JPEG and Audio CD operation
Repeat playback (CD)
Random playback (CD)
In the file browser, press ϳ/ϴ/ϵ/϶ to select
“Repeat” during stop mode.
1
Press ENTER repeatedly to select “Track”
or “All”.
2
Press PLAY.
• The unit automatically starts repeat playback
after finishing the current track.
3
To resume normal playback
Select Repeat : “Off” in step 2.
NOTE
• The repeat or random function is canceled when you eject
the disc or turn the power off.
• The track repeat function is canceled when SKIP
or
is pressed.
• In case of Audio CD, the function of A-B Repeat also can
be used. See “A-B Repeat playback” (see page 39).
In the file browser, press ϳ/ϴ/ϵ/϶ to select
“Mode” during stop mode.
1
Press ENTER to select “Random”.
2
Press PLAY.
• The Random playback will start.
3
To resume normal playback
Select Repeat : “Off” in step 2.
Program playback (CD)
In the file browser, press ϳ/ϴ/ϵ/϶ to select
“Edit Mode”, then press ENTER.
• When “Edit Mode” is black color, you can mark
the files which you want to add into Program
list.
Press ϵ/϶/ϳ/ϴ to select the file you want to
add into the program list.
• Press ENTER. Selected file was marked.
Repeat this procedure to select the other files.
Press ϵ/϶/ϳ/ϴ to select “Add To Program”.
Then press ENTER. All marked files are
added into the program list.
• When you finish storing the files you want into
the Program list, select “Edit Mode” again and
press ENTER to release edit mode.
Press ϳ/ϴ to select “Program View”, then
press ENTER. Program View shows only the
programed files that you have added in Step
2.
1
2
3
4
Folder-1
Folder-2
MP3-1
MP3-2
MP3-3
WMA-1
WMA-2
WMA-3
Music Playing
Edit Mode
Program View
Add To Program
MP3-1
MP3-2
MP3-3
WMA-3
Music Playing
Edit Mode
Browser View
Clear Program
Browser View
Program View
In the Program View, press PLAY. The files
start to playback in programmed order that
were added by you.
5
To remove file from program list in stop mode
In the Edit Mode, switch to Program View. Select the
files you want to remove, then press ENTER. Select
“Clear Program” and press ENTER. Marked file is
removed from program list.
NOTE
• The program function is canceled when you eject the disc
or turn the power off.