Sharp LC-52D82U Flat Panel Television User Manual


 
27
Advanced picture adjustments
This TV provides various advanced functions for
optimizing the picture quality.
Black
Changes the viewing depth by automatically adjusting
the dark portion of an image for easier viewing.
3D-Y/C
Provides high quality images with minimal dot crawl
and cross color noise.
Press MENU to display the MENU screen,
and then press
c
/
d
to select “Picture”.
Press
a
/
b
to select “Advanced”, and then
press ENTER.
Press
a
/
b
to select a specifi c adjustment
item, and then press ENTER.
• You can select “Color Temp.”, “Black”, “Fine
Motion Advanced”, “3D-Y/C”, “Monochrome”,
“Film Mode” or “Range of OPC”.
Press
a
/
b
(or
c
/
d
) to select the desired
parameter.
• See the table for the selectable parameters.
Color Temperature
For a better white balance, use color temperature
correction.
NOTE
• 3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
Monochrome
For viewing a video in monochrome.
Film Mode (3:2 pull-down)
Automatically detects a fi lm-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still fi lm frame for high-defi nition picture
quality.
Basic adjustment settings
1
3
2
4
Selected item
High
Mid-High
Middle
Mid-Low
Low
Description
White with Bluish tone
White with Reddish tone
Selected item
On
Off
Description
For high detail in black portions
No adjustment
Selected item
Standard
Fast
Slow
Description
Normal adjustment
For moving images
For still images
Selected item
On
Off
Description
For viewing in monochrome
Normal color
Selected item
On
Off
Description
Detects, analyzes, converts fi lm
source
Normal viewing mode
Range of OPC
The brightness level range of the OPC sensor's
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of
e
16 and a minimum of
f
16.
NOTE
• The range of OPC settings are active only when the OPC is
set to On.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
Selected item
Max.
Min.
Description
f
15 through
e
16
f
16 through
e
15
Press MENU to exit.
5
Fine Motion Advanced
Use Fine Motion Advanced to view fast-action video
more clearly.
Selected item
On
Off
Description
For obtaining a clearer image
Normal image
NOTE
• Fine Motion Advanced may cause image noise. If this
occurs turn the function “Off”.