Filter
Top Products
Page - 2 -
LE820 - LE822 - LE814 - LE824 - LE914 - LE925
Contents:
1. Preparation of the PC (Enabling multimedia folder)
2. Settings of the LCD-TV device
3. Description of terms
In case during the installation of the DLNA function at your SHARP LCD tv
from the 81x - , 82x - oder 92x - series you encounter any problems, use the
following instructions for installation.
In the following part of the manual you will find examples of installations and
answers to frequently asked questions concerning the above-mentioned
device series:
Preparation of the LCD-TV device:
Connect the PC and the LCD-TV to the router with a LAN cable and run a
software update on the LCD-TV.
You can find latest software in the service section of www.sharp.de website
on the Internet.
After updating software start the installation of the TV again!
In order to do so choose the menu "Set up",
After entering the menu highlight „ Reset“ and confirm your choice with the
„OK “- button on the remote control. Confirm the resetting and
restarting of the device (see instruction manual). This will take a few seconds.
Afterwards the image of installation will appear on the device. Carry it out
according to your local conditions.