Filter
Top Products
11
E
Installation
The monitor can be installed in three different ways.
Standing position
Place the monitor on the supplied stand.
Caution
• The stand is for use in landscape orientation. It cannot be
used for portrait orientation.
n
Assembling the stand
1. Insert the back into the front.
Align the mark (
) on the front with the edge of the back
and insert the back from above.
Front
Back
Back
Front
2. Slide the back across.
Slide the back until it clicks into place.
Back
3. Attach the bottom cover.
Align the arrow on the bottom cover so that it points toward
the front, and press the projections on the bottom cover
into the pocket on the front and back.
Front
Front pocket
Projection
Arrow
Back
Back pocket
Bottom cover
n
Mounting the monitor on the stand
1. Place the stand on a level surface.
2. Set the monitor on the stand.
Set the monitor so that the logo in the center is aligned with
the circle mark on the stand.
Logo
Circle mark
TIPS
• The stand and the monitor can be secured with xing
screws.
Fixing screws (supplied)