Filter
Top Products
47
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Advanced Features
– Titling a MiniDisc –
Titling a MiniDisc : continued
Notes:
● If the total number of tracks on the master MiniDisc does
not match that on the MiniDisc for stamping, the unit will
display “Can't STAMP” and turn off the power.
If this happens, adjust the total number of tracks on the
newly recorded MiniDisc using the edit operation.
● Use a MiniDisc that was recorded by this portable MD
to make a MiniDisc for stamping. Character informa-
tion may not be transferred if you use a MiniDisc re-
corded by other equipment. In such a case, enter at
least one character for the disc name or the track
names. You can transfer information once you record
the TOC.
4 Press the ENTER button.
5 When the unit displays “CHANGE MD”,
remove the master MiniDisc.
● Remove it without turning off the power. Or, the
operation will be cancelled.
6 Load a MiniDisc for stamping.
Operation of the MiniDisc for stamping
7 Press the ENTER button.
● The unit will finish recording the character infor-
mation and enter the stop mode.