Filter
Top Products
02/2/21 IMMT899H_E_6.fm
E-54
IM-MT899H
ENGLISH
References
-Error Messages-
Number or symbol appears in (*) position.
If the operation is not accepted, "--" may be displayed on the
main unit. For details, refer to the display on the remote con-
trol.
ERROR MES-
SAGES
MEANING
N-FULL
z
The number of a disc, group, or track
name exceeds 40.
(Shorten the name.)
NoDISC
z
A disc has not been loaded.
noSIG
z
Poor connection of the digital cable.
z
No output signal comes out from the
connected unit to playback.
(Use the AC power for the connected
unit.)
z
The input signal has improper sam-
pling frequency.
NoTRACK
z
There is no track to be played.
PLAYmd
z
You tried to record on a playback-only
disc.
POWER ?
z
The battery charger is defective.
PROTECTED
z
The write protection tab of a MiniDisc
is set to the protected position.
Sorry
z
Since a track number is currently be-
ing located or updated, the unit cannot
accept your command.
(Wait for a while and try the operation
again.)
T Form (*)
z
There is an error in the recording sig-
nal.
(Erase all of the tracks, and then record
again.)
ERROR MES-
SAGES
MEANING
T-FULL
z
There is no space left for recording
character information (track names,
disc names, etc.).
TEMP!
z
The temperature is too high.
(Turn off the power, and wait for a while.)
Tr. Protect
z
The track has been protected from be-
ing erased.
(Edit the track with the device on which it
was recorded.)
?DISC
z
A disc which contains data other than
music was played.
(A disc which contains nonmusic data
cannot be played.)
?GrForm
z
The group recording or the GROUP
RESERVE function cannot be per-
formed.
(Erase the disc name and retry the same
operation.)