Sharp 27N S300 CRT Television User Manual


 
7
Quick Reference Control Operation
L Location of Controls
Front Panel
Basic Remote Control Functions
The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
The degree of illumination will vary depending on the strength of lighting used.
The degree of illumination will decrease with time and depending on the temperature.
The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
Sunlight and fluorescent lighting are the most effective when charging the display.
32N-S400, 36N-S400
A POWER
Press On.
Press again Off.
B VOLUME UP/DOWN
(+) Increases sound.
() Decreases sound.
C SENSOR AREA FOR REMOTE CONTROL
D CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
Press both at same time to access MAIN MENU Screen.
E VIDEO/AUDIO TERMINALS
(VIDEO/AUDIO terminals are also provided on the rear.)
IN 2
NOTE:
A
C
B
D
E
POWER
CH
VOL +
POWER
CH
VOL +
A
B
C
D
E
27N-S300
POWER
CH
MENU
VOL +
POWER
CH
VOL +
MENU
Infrared Transmitter Window
DISPLAY
Press Displays receiving channel for
four seconds.
Press again Removes display.
Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press once Switch to external video
INPUT 1 mode.
Press again Switch to external video
INPUT 2 mode.
Press again Switch back to the
original TV mode.
See page 34.
ENTER
Used in some instances where a VCR
or Cable Converter Box requires an
enter command after selecting
channels, when using the REMOTE
KEYPAD button. (See page 36)
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
See pages 26 - 29 for channel
presetting.
Moves the
mark of the MENU
screens.
MUTE
Press Mutes sound.
Press again Restores sound.
CLOSED CAPTION appears when
sound is muted.
PIP FUNCTION
With the VIDEO inputs, you can watch
two pictures at the same time. See
pages 32 - 33.
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
VCR
MENU MUTE
CATV
PAUSE
PIP
TV
FLASHBACK
DISPLAY
INPUT
TV VCR CATV
STOP REC
REW PLAY FF
VCR CH
SWAP FREEZE MOVE SELECT
VOL
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
POWER
Press On.
Press again Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the four categories
A, B, C and D. The channels can be
accessed quickly by using these
buttons. (See pages 30 - 31)
VOLUME UP/DOWN
(+) Increases sound.
() Decreases sound.
In menu mode, changes or selects
the TV adjustments.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
TV-CATV MODE SELECT SWITCH
In TV position, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV.
In CATV position, sends power and
channel select commands to a cable
TV converter.
VCR CONTROL
See page 36.
0-9 27NS300/32/36NS400 1.1 5/31/00, 8:25 AM7