Sharp 32N S400 CRT Television User Manual


 
30
6 Press
MENU
to exit.
Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function
despite the presence of a broadcast signal. To continue watching TV under these conditions, switch
the BLUE SCREEN OFF.
While VCR input mode is selected, the BLUE SCREEN will not be shown on your TV even if the
BLUE SCREEN is turned on.
L PERSONAL PREFERENCE
By setting the PERSONAL PREFERENCE channels in advance,
you can select your favorite channels easily.
1 Press
MENU
to access MAIN MENU screen.
2 Press
CH UP
(
8
) or
DOWN
(
9
) to move the mark to
SET UP.
3 Press
VOL (+)
or
()
to access SETUP mode, then press
CH UP
(
8
) or
DOWN
(
9
) to move the mark to PERSONAL
PREFERENCE.
4 Press
VOL (+)
or
()
to select PERSONAL PREFERENCE select
mode in which you can program four favorite channels, in four
different categories. (total of 16 channels)
5 Press
CH UP
(
8
) or
DOWN
(
9
) to move the mark to the
desired position.
6 Press
REMOTE KEYPAD
on the Remote to input the CHANNEL
Number into the memory.
Example:
125 Press 100 followed by 2 and then 5.
7 Repeat steps 4 - 6 to input the next CHANNEL Number.
Set Up (Continued)
VOLUME
(+)/()
CHANNEL
UP (8)/
DOWN (9)
MENU
(MAIN MENU screen)
REMOTE
KEYPAD
PERSONAL
PREFERENCE
(SETUP mode)
(PERSONAL PREFERENCE select mode)
NOTE:
26-31 27NS300/32/36NS400 1.1 5/31/00, 8:11 AM30