Filter
Top Products
7
To use your LCD TV set, perform steps below.
Check the supplied accessories. (See page
6.)
Insert two “AAA” size batteries into the remote control. (See page
8.)
• Open the battery cover, and then insert batteries with their terminals corresponding to the (+) and (-) indications in the
battery compartment.
Open the terminal cover. (See page 9.)
• Pull down the hook located on the upper side of terminal cover to open the cover.
Connect the antenna cable. (See page 9.)
Connect with external devices. (See page 14.)
INPUT1 Terminal (COMPONENT)
Terminal for component connection.
INPUT2 Terminal
Terminal for S-video connection.
INPUT3/OUTPUT Terminal
Terminal for INPUT/OUTPUT connection.
INPUT5 Terminal
Terminal for PC connection.
INPUT4 Terminal (HDMI)
Terminal for HDMI connection.
Connect the AC cord to the AC INPUT terminal of the LCD TV set and plug in the AC cord to the wall outlet.
(See page 10.)
Turn on the main power. (See page 17.)
Press POWER on the upper side of the main unit.
The POWER/WAKE UP TIMER indicator located on the front of the main unit changes from red to green.
POWER
POWER/WAKE UP TIMER indicator
Start EZ SETUP. (See page 15.)
• The broadcasting channels and clock will be memorized automatically.
Before Using the LCD TV Set
1
2
3
4
5
6
7
8
LC-20D30U_E_P01-07.indd 7 2005/12/19 19:11:25