Filter
Top Products
41
Using external equipment
Option
MENU
Input Select
INPUT3 [AUTO]
AV-Y/C
RGB
AUTO
COMPONENT
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
DISPLAY OUTPUT-2
RS-232C
AC INPUT
DISPLAY OUTPUT-1
YP
B
P
R
S-VIDEO VIDEO R-AUDIO-L
COMPONENT
INPUT 1
INPUT 2
YP
B
P
R
S-VIDEO
COMPONENT
VIDEO R-AUDIO-L
INPUT 3
HD INPUT
MONITOR OUTPUT
ANT/CABLE 75ΩOUT
ANT-A ANT-B
AVC System (rear view)
Digital TV tuner
Watching broadcasts via a Digital TV tuner
Connecting a Digital TV tuner
You can use the INPUT 3 terminal when connecting a Digital TV tuner and other audiovisual equipment.
Displaying broadcasts via a Digital TV tuner
When connecting to the INPUT 3 terminal, select
“INPUT3” and set the correct input signal type on “Input
Select” in the menu. (See page 47.)
The setting is stored and can be selected on the
“INPUT SOURCE” menu.
To watch a Digital TV tuner image, select “INPUT3”
from the “INPUT SOURCE” menu using INPUT on the
remote control unit or on the Display. (See page 47.)
A
• Each time INPUT is pressed, the input source toggles.
• If the Digital TV tuner image does not come in clearly, you
may need to change the input signal type setting on the
“Input Select” menu.
• Refer to your Digital TV tuner operation manual for the
signal type.
• HD INPUT cannot connect to a PC. (Input resolution is
compatible with 1080I and 540P.)
• Use the PC INPUT terminals on the front of the AVC System
when connecting a computer. (See page 43.)
• When connecting to the HD INPUT terminal, be sure to
use a commerciallly available RGB cable with ferrite core
attached.
Component video cable
(commercially available)
AV cable
(commercially available)
S-video cable
(commercially available)
INPUT
TV
ANT-A/B
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
FREEZE
MODE
VIEW
SLEEP LEARN
EDIT/
ENT
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
100
0
When using component
video cable, select
“COMPONENT” for
“Input Select” in the
menu.
RGB cable (commercially available)
When using RGB cable, select
“RGB” for “Input Select” in the
menu.